Description
Our Camburg front coil spring preload kits are a cost effective and easy way to lift & level the front of your '17-20 Gen2 Ford Raptor while still keeping the plush factory ride with the OEM Fox coilovers. Lifting the front also increases your compression travel which is a great benefit off-roading. We offer them in black, gold, KINETIK gray and red versions. Don't confuse these with standard cheap spacer lifts. These preload the coil spring, they do not space the shock down allowing the suspension to droop out too far and lose compression travel by bottoming out the shock sooner. Running a taller tire will also increase needed ground clearance when off-roading. We CNC machine these in-house from aerospace quality 6061-T6 aluminum, then have them bead blasted, anodized and laser etched. These install easily onto your factory OEM Fox coilovers and lift the front end either 1.5? or 2? depending on which kit you go with. We recommend the 1.5? version to level the front end when running 35? tires and the 2? lift version when running larger 37? tires. These are not designed to be used with aftermarket coil springs on the OEM stock shocks. On the 19-20 models with the electronic FOX Live Valve suspension you will need slightly modify the plastic wire retainer so that it presses back into the lower spring seat slot. You can do this with a file and/or small disc sander to reduce the thickness of the tab. To install these you will need to remove the coilovers from the truck. We recommend using a heavy duty spring compressor so you're able to collapse the spring enough to install our spacers onto the shock body which is a precision fit. You don't have to completely disassemble the shocks and springs. Combine these with our KINETIK series billet upper control arms to correct and improve geometry for better handling. 17-20 Ford F-150 Raptor;Black;1.5 lift;Spring preload spacers;Hardware; California Residents: WARNING
