Description
FINALLY. A fan mount specially designed for those that need to attach a fan on their Skadis pegboard! Item is 3D printed with PETG. Options available for both 80 mm & 120 mm fans! PLEASE READ BEFORE BUYING Fan is NOT included. Fan screws are also NOT included, but will work with generic computer fan screws. The fan we recommend to use: 120mm https://a.co/d/aHuEV5n 80mm https://a.co/d/58JdJoB No additional hardware is needed for those using AC Infinity USB fans, although you will need to remove the rear fan shroud. The screws that come with the fan will work. This is designed to work with generic PC fan screws. Some assembly will be required depending on your needs. Depending on where you wish to place your mount, you may need to rotate the body & attach the legs accordingly. Please try with fan without any plants under it to avoid it dropping on your beloved plants! Instructions: 1) Before attaching on legs, determine where on your Skadis board you would like to place your fan mount. The arrow slots should line up with 3 holes on your pegboard (2 on one side, 1 on the other). Insert the arm & mount assembly to make sure you have enough clearance above & below the mount! 2) Insert the legs facing DOWN 3) Mount the fan to the arm & fan mount assembly. There is no "right" way, & you can mount the fan however you like to achieve a desired height. The way I have it in the pictures attaches the fan mount to the top 2 screws. 4) Insert fan assembly into the slot on the Skadis mount & screw in with your Allen key. What's included: - Skadis mount - 4 Skadis mount legs (only need 3, but 1 extra in case you drop one) - Fan arm - Fan mount for 80 mm or 120 mm fan - 2 screws & 2 nuts (M4) - 3 mm Allen wrench Ikea Skadis Fan Mount For Greenhouse Cabinet
