Description
A corner fan mount specially designed for the Ikea Milsbo cabinet! Item is 3D printed with PETG. Options available for both 80mm & 120mm fans! PLEASE READ BEFORE BUYING Fan is NOT included. Fan screws are also NOT included, but will work with generic computer fan screws. The fan we recommend to use: 120mm https://a.co/d/aHuEV5n 80mm https://a.co/d/58JdJoB This works great with my Ikea Milsbo shelf. No additional hardware is needed for those using AC Infinity USB fans, although you will need to remove the rear fan shroud. The screws that come with the fan will work. This is designed to work with generic PC fan screws. Corner mounting screw is also included, but if you still have your own corner screws that came with the Ikea Milsbo cabinet, those will work as well. You WILL need a Philips head screwdriver as well as a 2.50 Allen key. Please try with fan without any plants under it to avoid it dropping on your beloved plants! Instructions: 1) First, mount the fan to the arm & fan mount assembly. There is no "right" way, & you can mount the fan however you like to achieve a desired height. The way I have it in the pictures attaches the fan mount to the bottom 2 screws. Fan mount is designed to have enough clearance even if you are using 120 mm fans, & the shelf on top has grow lights on the bottom. 2) Using a Philips head screwdriver, screw on the corner mount. Directionality doesn't matter, but would probably recommend having the hex nut facing up, so the M4 screw goes up through the bottom. This way you can more easily access the screw from the bottom without having to work around a shelf if you have a shelf in the slot immediately above the fan. 3) Insert fan assembly into the slot on the corner mount & screw in with your Allen key. What's included: - Corner mount - Fan arm - Fan mount for 80mm or 120mm fans - 2 screws & 2 nuts (M4) - 1 mounting screw - 3 mm Allen wrench Ikea Milsbo Fan Mount For Greenhouse Cabinet
