Description
This listing is for a ready to press Direct to Film Print or Sublimation Transfer - Ready to heat press onto your own garment ✦ SIZING Each measurement here is for the width of each transfer, length will vary per design 4.5" - Pocket Size 5" - Infant Size 8" - Toddler Size 9" - Youth Size 11" - Adult Size 13" - XXL Adult Size If you are new to DTF or sublimation transfers please familiarize yourself with the process & application below to achieve your desired results. ALL DTF OR SUBLIMATION TRANSFERS DO REQUIRE A HEAT PRESS!! ✦ SIZING ✦ DTF DETAILS - DTF printing uses water based inks which are smooth & stretchy, our transfers work great with light or dark garments, & with Cotton, Polyester, Nylons, Velour or blended fabrics - We Highly recommend to use a heat press for proper pressure & temperature required - We are not responsible for transfers that are not pressed correctly, Please follow instructions provided ✦ SUBLIMATION DETAILS - For application on 50% polyester or higher materials (these DO NOT work on 100% cotton!) 100% white polyester will produce the best color results. - You can use shirts that are light in color like: gray, tan, pastels, but know your colors will be faded. - 50% poly will achieve a more faded vintage look & will lose some color in it's first wash. - Do not wash inside out or the lost color may get trapped inside the shirt & stain. ✦ PRESSING INSTRUCTIONS For DTF: TEMPERATURE: 320-350 F TIME: 12-15 Seconds PRESSURE: MEDIUM/HEAVY 1. Pre-press shirt to remove moisture 2. Place Your DTF TRANSFER on Garment 3. Remove the t-shirt from the heat press & wait till the DTF TRANSFER to cool down. This is a COLD PEEL 4. Place back the t-shirt on the heat press & press it again for another 7-12 seconds with parchment paper on top. For SUBLIMATION: TEMPERATURE: 375-400 F TIME: 60 Seconds PRESSURE: MEDIUM/HEAVY 1. Set your heat press to 375-400 degrees. If you find your white shirts yellow at 400, lower your temp. You can rinse in peroxide water mix to help remove any yellowing as well. 2. Place a sheet of white copy paper or parchment paper inside your shirt to prevent bleed through. 3. Position your transfer face down BLUE SIDE UP (use heat tape if desired) & cover with White copy paper or parchment (not wax paper, un-coated un-dyed parchment paper) The dye turns into a gas when heated, & is absorbed into the shirt. It can also transfer to & stain the top of your press & the inside/back of your shirt if you do not use the blow out paper inside the shirt & on top of the print. 4.Press 45-60 seconds on med pressure 5.Remove transfer immediately. Don't let the print sit there, & Do not try to close & repress, the print will always shift slightly when you lift the lid & cause a ghosting/double print effect if it's not removed immediately Please reach out to us at any time if you have any questions Retro St Patricks Day Day DTF Sublimation | DTF Tshirt Transfer | Ready to Press Saint Patrick's Day Transfers Sublimation DTF
