Description
Use these Tetris Piece Resin Molds to create your own stunning pieces made out of resin, concrete, wax, or soap. Finished Pieces made with these molds measure between 1 & 1.5 inches. How to choose silicone type: If you don't use UV resin to pour your projects, our green molds for epoxy resin are the preferred choice for most crafts. Select the "Clear Mold" option for UV resin projects. Our UV molds are totally transparent, & are more flexible than our green epoxy resin molds. Thicker items may require longer curing times for UV resin. I pour & demold the item first, then use paint pens to paint the details after it's hardened. It's much easier to do this one after you demold, not before. Also a good way to avoid surface bubbles in engraved or high detail molds is: pour a tiny bit of clear resin in the mold as soon as you're done mixing. Use a flat silicone brush to spread the resin over the details & engraving & squish out any bubbles you see. Then you can work on mixing colors into your resin while the clear resin sits in the mold. This will give you a better bubble free surface finish than if you mixed micas & glitters into resin & poured it straight in. (this technique works great for druzy & the detailed hamsa molds) Check out the tips below on how to care for your molds: ● Do not use a torch to pop bubbles while resin is in the mold, this will dramatically shorten the lifespan of silicone. ● Clean molds gently with running water & your fingertips only. ● Do not scratch or rub repeatedly as it can wear away the shiny finish & make that spot matte. ● Avoid using alcohol or baby wipes to clean the molds, & don't touch the inside of the mold with your fingers, as it may smudge. ● To remove lint or hair from the mold, carefully use masking tape to lift it out without leaving a mark on the mold. ● Heat, alcohol, & abrasive resins can shorten the lifespan of any silicone mold. ● It's best to pour a thin layer of clear & let it cure before using things like dried flowers, chunky glitter, or other inclusions. This gives a protective layer so you don't have anything poking thru the front, & gives a nice sleek finish every time! Tetris Pieces Resin Mold - Magnet & Wax Melt Game Piece Silicone Engraved Mould For Epoxy Or Uv By Resinqueenshop
