Description
Finished product size: 4.25.57cm (1.652.162.75inch) PS:Please note the size, more suitable for ornaments, accessories Resin production method: the 1, soft crystal glue (the finished product will be soft) operation method. l prepare the container used & clean & dry mold. ② The required crystal glue A & B two components to 3:1 weighing, the A group heated to about 40 ℃ & then add B group, pour into the container, stir well, eliminate bubbles. ③ After removing the bubble, use a small beaker or syringe etc. to evenly drop on the mold, such as the edge of the mold crystal glue can not trickle (basically can go), can be used to poke a small needle, so that the glue evenly coated on the surface. ④ Solidification: After coating the mold, the gel time is about 3 hours at room temperature 25℃; the curing time is about 36 hours at room temperature. Or put the coated mold into the thermostatic drying oven at 60℃ for 3 hours that is completely cured. 2、Operating method of hard heat-setting crystal adhesive (finished product is harder). ① Prepare before configuration as above. ② Weigh the required A & B components of crystal glue at 3:1, stir well, & then drop on the mold. ③ Solidification: The coated sign can be put in the oven at 60℃ for 1.5 hours; or placed at room temperature for about 13 hours to dry. Express selection of registered express delivery in various places. The transportation time is generally about 10-20 days Because of the impact of the epidemic, express delivery may be slower, please understand, thank you. If you have any questions, you can contact: luowenjun2018@outlook.com Bullfighting Dog Candle Silicone Mold, French Chocolate 3D Resin Mold
