Description
Faucet splash catcher is placed around the neck of your kitchen faucet to keep water off the counter while also providing protection from water damage. ABOUT OUR PRODUCT: - SPLASH CATCHERS are made using 3 layers. 100% cotton top layer, middle absorbing layer, & white terry cloth under layer. - DISH MATS are made using 3 layers. 100% cotton top layer, middle absorbing layer, & terry cloth under layer. (Dish mats can be found in the options size drop-down). Need more than the quantity available? Please message me! HOLE SIZE: Diameter of center hole is approximately 2.5 inches on all options but if you need a bigger/smaller hole, please include a note in the notes section at checkout with the diameter size in inches. SLIT OPENINGS: All size options - slit openings will always be facing the sink towards the front, unless you request to have them towards the back instead. SIZES: S - 6x5 inches M - 9x5 inches L - 12x5 inches XL - 18x5 inches XXL - 24x5 inches 3XL - 30x5 inches XL-3XL is also available with 2 holes - Please choose the 2-hole option under the size drop down. 2 HOLE OPTIONS (Please Read): Send measurements (via note to seller section at checkout or Etsy messages) when purchasing any 2-hole options. See below on how to measure. HOW TO MEASURE 2 HOLE SINKS: Please measure from the mid-point of where each hole needs to be. For example, if your holes need to be 7.5" apart, the center point of one hole to the center point of the other hole will be exactly 7.5". (Measuring this way will ensure the faucets will be centered in the hole) OR let me know where the holes need to be centered on the size that you order. For example, if you order a 2hole 24x5: "First hole is centered on the 12-inch mark & the second hole is centered at the 20-inch mark." TYPES OF SINKS WITH 2 HOLES: SINK 1 (Most USA Sinks): Has the faucet in the middle & then the back flow to the left or the right. (One hole would be centered on the splash catcher & the second hole to the left or right) SINK 2: Has two faucets one on the left & one on the right. (In this case the holes would be proportioned on the splash catcher & no hole would be in the center) I hope I didn't confuse you but message me and/or include a picture of the sink if you are not sure :-) CUSTOM (1-4) HOLE OPTIONS/AWKWARD SHAPED SINKS: Please place order for either "Custom up to 20x5 inches" or "Custom up to 30x5 inches" & please message me right away via Etsy messages with measurements, photos, etc. When measuring, you can easily place a measuring tape beside the faucets & take a picture or you can let me know where the holes will be centered on the 30 inches starting from the left hole such as hole #1 is centered at the 8-inch mark, hole #2 is centered at the 12-inch mark & hole #3 is center at the 16-inch mark. Please allow 2 additional processing days for custom orders. CARE: Wash warm or cold. At least 1-2 times a week. Dry medium heat. Iron ok (cotton setting). Make sure to have an extra one handy! GIFT
