Description
This is made in USA by Wcm There are 2 options to choose from. one with an ifp tool (Yellow pic 7 set) & the other without a ifp tool (blue pic 6 set). here is the 6 set description, the ifp description is at the bottom. This auction is a combination set. It has 6 tools for the 2021 fox dhx2 & X2 shocks. All tools are made in the USA. They are CNC machined out of 6061 aluminum. This is all the clamps & all the pinned sockets you need to rebuild the fox 2021 X2 shock. Well sell smaller kits as well & several individual items for the 2021 & older X2. First we have shock clamp for the 2021 FOX float dh x2 & X2. The clamp fits the 3/8" shaft & the inner air sleeve. The 3/8 will not fit older versions of the x2 shocks. Its made for a precision fit. We left plenty of material so there is a lot of clearance when using the 3/8 shaft clamp, & we made it .440 thick to fit into the tight spaces. It is thin enough to fit the 2021 version shock. It is the same fit as fox tool number 803-01-690 Next we have a wrench for the negative air seal head. Its 9.5" long & has chamfered corners so its easy on your hands. It has a 3/8" square drive so you can torque it to spec, just line the torque wrench up to the line (perpendicular to the wrench) & your good to go. This is the same fit as fox part number 398-00-419. This tool fits 2016-2021 x2 & dhx2 float shocks. Then we have a bearing housing driver, this is the tool on step 12 of the fox float x2 rebuild instructions. This is the same fit as fox tool number 398-00-887. This is used on the 2021 fox x2 shocks. It has 4 hardened steel pins & is CNC machined for a great fit. It has a 30mm hex that is plenty tall for a wrench or a crescent. Then we have the REZI vice clamp. It includes the 1.25 inner air sleeve clamp , equivalent to fox part number 803-01-690 & the Rezi body clamp, equivalent of fox 803-01-545 . The rezi body clamp is only used in 2021 & the inner air sleeve clamp will fit all fox shocks. The rezi body side of the clamp we left plenty of clearance so you end up with 170 degrees of working room. Clunky clamps can be as little as 90 degrees. Last we have a cartidge cap tools. They have 4 hardened pins that fit both red & blue caps for the 2021 dhx2 & X2 shock only. One has a 3/8" square drive, the other will fit a 5/8 or 16mm socket. It is the same fit as fox tool number 398-00-882 & 398-00-881 Everything above comes on both options. The more expensive option (yellow pic 7 set) also comes with a IFP tool. here is the description for it. We have a IFP for the 2021-current X2 & dh x2 fox float shocks. The shaft measures 1.14 long. It goes around the the pull out tab for an accurate measurement, you just push it all the way down & your done. This tool does not remove the IFP, all shops i talked to said they preferred to use air for the ifp removal. Shock is NOT included in auction, just the tool. We have several listing of these tools individually or in small sets. 2021-2022 Fox Float X2/Dhx2 Shock Shaft
