Silicone 3D-Molds in The Form Of Miniature Donut Different Shapes & Sizes. Molds For Polymer Clay Plastic
Shop on Etsy


More miniature sweets here:§ion_id=22158111 Please choose one of the forms or a set of 8 molds: 1. 19186mm=0,7480310,7086610,23622" 2. 189mm=0,7086610,354331" 3. 18168mm=0,7086610,6299210,314961" 4. 25189mm=0,9842520,7086610,354331" 5. 17155mm=0,6692910,5905510,19685" 6. 187mm=0,7086610,275591" 7. 20188mm=0,7874020,7086610,314961" 8. 165mm=0,6299210,19685" The color of silicone may differ from the photo, but it will not affect the quality of molds! - Sending the package within 5-7 working days after payment! - The molds are made of strong & elastic silicone, designed for making any complex shapes from gypsum, wax, soap, epoxy, etc. Also suitable for polymer clay because of the optimum stiffness & heat resistance (short-term withstand temperature of 290 o C(554oF ), Up to 200 o C (392oF ) for a long time). Recommendations for the use of molds: - Shortly before working, the mold should be washed with water, after which it should be dried on a napkin. - It is necessary to work very carefully with silicone molds, do not use sharp tools when working with molds. - Epoxy resin should be poured into the mold by layers, allowing the air bubbles to completely exit. To speed up the bubbling & curing time of the resin, the molds can be slightly heated (carefully, do not overheat! The resin can boil . Silicone is afraid of active chemistry, after 10-20 fillings with epoxy resin, the mold can become brittle. The service life of molds depends on the quality of the jewelry resin & can be up to 20-30 fillings - It will also be very difficult to clean the mold after unsuccessful filling (if the resin does not harden). - It is recommended to bake complex cameos & flowers together with mold & take them out only after full cooling. -To drink the finished product from the mold very carefully, first slightly bending the mold from the edges to release the product, then lightly pressing on the center of the mold, pull out the edges & remove the product. To facilitate the extraction of the finished product from a complex deep mold, we recommend that it be removed under running water with soap. - FORMS DO NOT ACCEPT FOOD PRODUCTS! Silicone 3D-Molds in The Form Of Miniature Donut Different Shapes & Sizes. Molds For Polymer Clay Plastic



You may also like

Top in Etsy

View all
View all