Description
Decal Sizes: 3" wide X 1.7" tall 4" wide X 2.3" tall 5" wide X 2.9" tall 6" wide X 3.5" tall 8" wide X 4.6" tall 10" wide X 5.8" tall 12" wide X 7.0" tall 15" wide X 8.7" tall Alternative Sizes: If you need a size different than one of the pre-determined sizes, please contact us for a price quote. Mirrored (Reversed): If you would like the vinyl decal made mirrored (reversed) please leave a note to seller at checkout or send a private message as a reminder. Not all colors we sell will match on the adhesive side & the facestock side of the vinyl. This can effect the ability to install the decal on the inside of glass to be seen correctly on the outside. Please contact us to make sure your selected color will work for this type of application. Vinyl Material: The vinyl decal is easily applied to many smooth surfaces. It has strong outdoor durability & is weather resistant. Durability of vinyl decal outdoors will vary based on exposure to the sun & material type. Installation: 1) Examine the decal for any damage that may have occurred during shipment. Rub over the decal with a squeegee or credit card to ensure the decal is stuck to the transfer tape & flat. 2) Prepare application surface area making sure it's clean & dry. 3) For smaller decals: Slowly & carefully apply the decal & transfer tape to the surface by simply peeling & sticking it. Once everything is adhered to the surface, rub all areas of the decal with a squeegee or credit card to ensure full adhesion. The decal adhesive is pressure sensitive. 4) For bigger decals: Use masking tape to position the decal where you want at the top of the decal (or the side for decals that are longer than they are tall). Fold it above the tape using the tape as a hinge & remove the backing paper leaving only the decal & the transfer tape. With a squeegee or credit card slowly roll the decal down over the surface carding with the squeegee until the decal is applied. The decal adhesive is pressure sensitive. 5) Slowly peel the transfer tape away from the decal rolling it back onto itself at a 180 degree angle until only the decal is left on the surface. 6) If you encounter air bubbles you can remove them using a sharp needle, poking a hole in them, & rubbing over the decal with a finger to smooth out the air. Bike Vinyl Decal Sticker
