Description
DESCRIPTION: Print on Demand Transfers Heat Transfer Vinyl Decal by Siser & is printed with eco-solvent ink, Cut Out & ready to press. These are Ready to Press with transfer sheet already applied on the Design. All you have to do is remove the backing & apply to your shirt. Heat Transfer & Sublimation Transfer Instructions are listed below. HEAT TRANSFER: HTV Transfers are printed with eco-solvent ink on a commercial grade printer. Transfer sheets are reusable. These transfers can be used on any color material. APPLICATION: Pre-Heat fabric 3-5 seconds, this will remove any moisture that may be in the fabric that could cause the vinyl to left after washing. Pre-heating should be done on ALL heat vinyl projects. Iron or Heat Press for 15 Seconds at 315F at Medium Pressure (don't forget to cover with a Teflon sheet or pillowcase to protect the masked transfer from the top of the heat press or iron). TO ADHERE: 1. All you have to do is remove the backing & apply to your shirt. 2. Place transfer on garment, cover with Teflon sheet & iron or press. ADHERES TO: 100% Cotton Poly/Cotton blends 100% Polyester Leather Lycra/Spandex CARE INSTRUCTIONS: Do not dry clean Wash inside out Machine wash w/mild detergent Wait 24 hours before first wash Dry on normal setting NO returns on any transfers. These are print on demand transfers. APPLICATION: Pre-Heat fabric 3-5 seconds, this will withdraw any moisture that may be in the fabric that could cause the vinyl to peel after washing. Pre-heating should be done on ALL heat vinyl projects. Iron or Heat Press for 15 Seconds at 315F at Medium Pressure (don't forget to cover with a Teflon sheet or pillowcase to protect the masked graphic from the top of the heat press or iron) Teflon sheets are available in separate listing if one is needed. Also use care instructions that is on your garment, certain materials may tell you not to machine wash or dry, so be sure to check that out as well. - SUBLIMATION: Sawgrass Sublijet HD Inks TexPrint-R Sublimation Transfer Transfer needs to be used on fabric that is at least 50% polyester, the more polyester, the more vibrant the transfer will be. A 50% polyester item will give you a nice vintage look. The shirt/fabric must be a light-colored fabric. NO BLACK or dark fabric. It will not show up! These transfers will not print white! If there is any white in the image it will become the color of the shirt you put the transfer on. Due to differences in monitors, the colors shown on the listing may slightly differ from colors on transfer. Also, the transfers may appear a different color on paper but once it is heat activated the colors come to life :) Sizing is determined by the longest side of design. You will need a heat press to use this transfer, an iron will not get hot enough. General instructions are as followed for shirts but adjustments may need to be made depending on your personal heat press & its abilities. Other sub material time & temp guide is included in listing
