Description
You will love our handcrafted, solid wood table pedestals! Our table legs are a fantastic source for other woodworkers, DIY makers, or people who are planning to make a custom dining table! Made from premium hardwoods & softwoods sourced locally in Kennesaw, GA. ✔ Free Shipping ✔ Solid Wood ✔ Made in the USA ✔ Family-Owned Dimensions: ● 7 1/4" at widest points of pedestal & foot ● 33" Foot ● 30" Top Support Recommended assembly: ❶ We recommend pre-drilling 2 holes down through the top of the top board using a forstner bit (Just enough to sink a bolt head with washers). ❷ Then, pre-drill 2 up through the bottom of the foot going up into the pedestal upright (These should be drilled about 2" deep). ❸ Next, measure & line the pedestals up & clamp them firmly with wood glue between the joints. Use two, 4" lag bolts with a flat washer & locking washer & drive them through the top supports down into the pedestal using an impact drill with a socket attachment. ❹ Repeat up through the bottom of the foot using 6" lag bolts. What to expect with each finish: ● Un-sanded: The pedestals will show bandsaw marks. This suits someone who wants to save money & sand them on their own. It also works well for a more rustic finish if you decide to leave the bandsaw blade marks & stain or wax them as is. Excess glue runoff will be sanded & cleaned up. ● Sanded to paint: Bandsaw blade marks will be cleaned up using 100 grit sandpaper. ● Sanded to stain: Bandsaw blade marks will be cleaned up using 100 grit sandpaper, then they will be sanded with a 220 grit sandpaper. Policies: Returns/Exchanges: We do not allow returns or exchanges, however if you have an issue with your order please let us know. Shipping: Shipping services are not offered to AK, HI, PR, PO, APO or FPO addresses. Orders that are placed to non-serviceable areas will be cancelled. Trestle Dining Table Pedestals - "The Maverick" Design Raybroswoodwork
