Description
ROCK ON Skeleton hands in all clear rhinestones. Iron on only. Design uses all 6ss or all 10ss 2 sizes to choose from I send ironing instructions but easy to iron on to your favorite shirt with a house hold iron! Instructions: 1. Preheat iron to cotton setting. 2. Carefully remove transfer from cardboard packaging. 3. Peel off textured backing from the design (stones should stick to the clear plastic sheet). If any stones have shifted out of place, put them back in place using tweezers. 4. Place plastic sheet, stone side down on fabric & press into place with hand. The clear plastic sheet should stick to the fabric. 5. Place iron over design area & apply steady pressure for 15 seconds - DO NOT MOVE IRON AROUND AS STONES MAY SHIFT - 6. Turn Garment WRONG SIDE OUT & Place iron over design area for another 15 seconds & repeat. 7. Set aside & allow to cool for 3 to 5 minutes. 8. Turn fabric to right side out. Slowly & carefully peel the clear plastic sheet away from the fabric. If all stones are not sticking, you may re-iron on the opposite side of the fabric again. Best Care: Wash inside out & air dry. Wear To Start is NOT responsible for garments for any reason. Look over carefully prior to ironing. Make sure the back of the transfer is free of plastic or debris. Use tweezers to remove any unwanted materials that might have been missed from the transfer, or to put the rhinestone back in place if they moved from original location on the carrier. Rock On Rhinestone Skeleton Hands Diy Iron On, Skull Hands, Skeleton Gothic Bling Iron
