Description
In order to ensure the proper handling and recycling of refrigerant and waste materials, the Environmental Protection Agency (EPA) requires certification in addition to training. The chlorofluorocarbon (CFC) certification process consists of a single course that lasts between five and eight hours, which can be offered through colleges and universities across the nation. This course covers a variety of topics related to refrigeration and prepares students to take a certification exam. Environmental ImpactsDestruction of ozone by chlorinePresence of chlorine in chlorofluorocarbon (CFC) and hydrochlorofluorocarbonhydrochlorofluorocarbonA compound consisting of hydrogen, chlorine, fluorine, and carbon. The HCFCs are one class of chemicals being used to replace the CFCs. They contain chlorine and thus deplete stratospheric ozone, but to a much lesser extent than CFCs. HCFCs have ozone depletion potentials (ODPs) ranging from 0.01 to 0.1. Production of HCFCs with the highest ODPs are being phased out first, followed by other HCFCs. A table of ozone-depleting substances shows their ODPs, GWPs, and CAS numbers. HCFCs are numbered according to a standard scheme. (HCFC) refrigerantsIdentification of CFC, HCFC, and hydrofluorocarbonhydrofluorocarbonA compound consisting of hydrogen, fluorine, and carbon. The HFCs are a class of replacements for CFCs. Because they do not contain chlorine or bromine, they do not deplete the ozone layer. All HFCs have an ozone depletion potential of 0. Some HFCs have high GWPs. HFCs are numbered according to a standard scheme. (HFC) refrigerants (not chemical formulas, but idea that R-12 is a CFC, R-22 is an HCFC, R-134 is an HFC, etc.)Idea that CFCs have higher ozone-depletion potential (ODPODPA number that refers to the amount of ozone depletion caused by a substance. The ODP is the ratio of the impact on ozone of a chemical compared to the impact of a similar mass of CFC-11. Thus, the ODP of CFC-11 is defined to be 1.0. Other CFCs and HCFCs have ODPs that range from 0.01 to 1.0. The halons have ODPs ranging up to 10. Carbon tetrachloride has an ODP of 1.2, and methyl chloroform's ODP is 0.11. HFCs have zero ODP because they do not contain chlorine. A table of all ozone-depleting substances shows their ODPs, GWPs, and CAS numbers.) than HCFCs, which in turn have higher ODP than HFCsUnderstanding of the atmospheric effects from the types of refrigerantsHealth and environmental effects of stratospheric ozone depletionEvidence of stratospheric ozone depletion and role of CFCs and HCFCsClean Air Act and Montreal ProtocolCFC phaseout dateR-22 phaseout dateVenting prohibition at servicingVenting prohibition at disposalVenting prohibition on substitute refrigerantsMaximum penalty under the Clean Air ActClean Air ActA law amended by Congress in 1990. Title VI of the CAA directs EPA to protect the ozone layer through several regulatory and voluntary programs. Sections within Title VI cover production of ozone-depleting substances (ODS), the recycling and handling of ODS, the evaluation of substitutes, and efforts to educate the public. Montreal ProtocolMontreal ProtocolThe international treaty governing the protection of stratospheric ozone. The Montreal Protocol on Substances That Deplete the Ozone Layer and its amendments control the phaseout of ODS production and use. Under the Montreal Protocol, several international organizations report on the science of ozone depletion, implement projects to help move away from ODS, and provide a forum for policy discussions. In addition, the Multilateral Fund provides resources to developing nations to promote the transition to ozone-safe technologies. The full text of the Montreal Protocol is available from the United Nations Environmental Programme (UNEP). (the international agreement to phase out production of ozone-depleting substances)Section 608 RegulationsDefinition/identification of high and low-pressure refrigerantsDefinition of system-dependent versus self-contained recovery/recycling equipmentIdentification of equipment covered by the rule (all air-conditioning and refrigeration equipment containing CFCs or HCFCs except motor vehicle air conditioners)Need for third-party certification of recycling and recovery equipmentStandard for reclaimed refrigerant [Air Conditioning, Heating, and Refrigeration Institute (AHRI) Standard 700-2016]The sales restrictionThe Clean Air Act prohibition on ventingSubstitute Refrigerants and oilsAbsence of drop-in replacementsIncompatibility of substitute refrigerants with many lubricants used with CFC and HCFC refrigerants and incompatibility of CFC and HCFC refrigerants with many new lubricants (includes identification of lubricants for given refrigerants, such as esters with R-134; alkylbenzenes for HCFCs)Fractionation problem-tendency of different components of blends to leak at different ratesRefrigerationRefrigerant states (vapor versus liquid) and pressures at different points of refrigeration cycle; how/when cooling occursRefrigeration gauges (color codes, ranges of different types, proper use)Leak DetectionThree R DefinitionsRecoverRecycleReclaimRecovery TechniquesNeed to avoid mixing refrigerantsFactors affecting speed of recovery (ambient temperature, size of recycling or recovery equipment, hose length and diameter, etc.)Dehydration EvacuationNeed to evacuate system to eliminate air and moisture at the end of serviceSafetyRisks of exposure to refrigerant (e. g., oxygen deprivation, cardiac effects, frost bite, long-term hazards)Personal protective equipment [gloves, goggles, self-contained breathing apparatus (SCBA)-in extreme cases, etc.]Reusable (or recovery) cylinders versus disposable cylinders [ensure former Department of Transportation (DOT) approved, know former's yellow and gray color code, never refill latter]Risks of filling cylinders more than 80 percent fullUse of nitrogen rather than oxygen or compressed air for leak detectionUse of pressure regulator and relief valve with nitrogenShippingLabels required for refrigerant cylinders (refrigerant identification, DOT classification tag)
