Description
๐ Premium Quality Material - The brake fluid tester housing is made of thickened ABS material and the testing head is made of sturdy metal material with excellent craftsmanship. It has excellent oil resistance, heat resistance, wear resistance and insulation. There is also an anti-fall design, so that you are not easy to damage during use, it is a must-have automotive tool for you..๐ Widely Applicable - This brake fluid moisture tester can detect the moisture content in DOT 3, DOT 4 and DOT 5.1 brake fluid, suitable for most cars. It is perfect for personal garage, professional repair store use of automotive specialty tools, can also be used for intelligent identification of zero fire wire, broken wire finding, high and low sensitivity switching..๐ Automatic Power Off - Our testers have an automatic power-off function, when no concentration is detected within 5 minutes, the meter will automatically power off to prolong the battery life. And when the battery voltage is lower than 2.6V the display will prompt, lower than 2.4V, the detector will automatically power off, then you need to replace the battery in time!.๐ Moisture Detection - Immersed the metal part of the detecting head into the liquid for 3 seconds until the display stabilizes, display 0~2 percent, green backlight, brake fluid can still be used. Display 2~3 percent, the backlight is yellow and beeps slowly, please change the brake fluid. Greater than 3%, bright red backlight, and buzzes rapidly, please change the brake fluid immediately..๐ Warm Tips - Batteries are not included in our automotive brake fluid tester, you need to buy them by yourself. Check the probe for dirt or breakage before use, when using, the metal part of the detector pen must be completely immersed in the liquid, after testing, please clean the probe head first and keep it dry. Protect the detection head in order not to affect your detection accuracy.
