Description
A. Working Frequency: The working frequency of this card copier reader is 125KHz/13.56MHz, support IC ID dual frequency replication, support NFC label.B. Widely compatible with the Windows operating system, plug the CD2 device into a USB port, click on the device to download the required software for installation, and once the installation is completed, it can be used. CD2 has the characteristics of simple and convenient operation, fast reading and writing speed, strong reading and writing ability, and high success rate in reading and writing.C. CDS=CD2+ID2, is an upgraded device of the CD2 read-write card replicator. It can be used not only for R5 smart rings, but also for R4 smart rings, and can read and copy 98% of IC ID NFC RFID cards. Some fully encrypted cards may not be able to read or write, please pay attention to the prompts for this feature when purchasing.D. Common Frequency Identification Card Read and Write: Put the card on the card reader, and then according to the software read EMID to scan the card. The software will scan and display the card number. Place a writable 125KHz chip on the card reader and press Write EMID on the software..E. Read and Write IC Semi and Full Encrypted Card: Place the card on the reader and press Read on the software to begin decrypting. √ means successful decryption and X means failed decryption. After successful decryption, the software will display the card number. Place a writable chip with a writable 13.56MHz on the reader, then press Write Type a on the software..F. High Efficiency and High Speed USB: USB transmission line connected to the device, immediate response, no need to install drivers, quickly read the card number.G. Obtain Software: When you connect this card reader to your computer, you can find the software on your computer, convenient and simple operation.
