Description
1. A NEW Vyperr Print Bed Surface Top Plate Only: 1PC 265x250mm/10.43x9.84inch Flexible Build Plate, No magentic Sticker. A perfect spare double sided hot bed cover for your Vyperr stock magletic platform kit. Smooth PEO+Textured PEI, both sides can be used, more effective. Do not use it alone, must match a magletic sticker. A perfect diy replacement part for same size 250x265 build plate kit (Asin:B0B6347LLG)at our store..2. Great First Layer Adhesion: **Do Not sand the PEO bed to avoid permanent damage.**This Double sided build plate is compatible with most 3d printer material, such as PLA, PETG, TPU, ABS, etc. No glue, No tap, An Appropriate Z axis is very important, if too low causing a filament buildup and scratch the print bed. Too high the prints come off the hotbed. Turn OFF the cooling fan and Slow down the speed to 10-25mm/s when going on the first layer. Adding Skirts and DRY filaments also help..3. Quality security: FYSETC 100% official, made of high-quality spring steel, the flexible Steel PEI Sheet won't kink or warp when flex. It can stick well to the magentic hotbed, can resist high strength no deformation. The Smooth PET surface has a high temperature resistance of 100℃/212℉(Not suitable for ABS) and the Textured PEI side can stand high temperature up to 190°C/374℉. Please note: Not scratch the build plate with the printing nozzle directly to avoid scorching the surface..4. Wide Compatibility: The PEI Printing Surface can be compatible with PLA, PETG, TPU, ABS, PA-CF, WOOD and any other filaments. Different filament has a bed temperature setup, our testing result for your reference: PLA: 50-65℃, PETG: 70-80℃, TPU: 60-70, ABS: 90-100℃. For high-temp required filament ABS, we recommend to print on the Textured PEI surface, NOT on the Smooth PET side..5. Simple Installation and Use: A drop-in replacement for the stock print platform. Align this flexible plate onto your original magentic base on the non-heated bed. The removable PEI sheet can be magentically bonded to it. Then level the bed with auto bed leveling sensor. Keep the print surface CLEAN for better fisrt layer adhesion. And Easy to remove the prints, slightly flex it repeatedly to pop your prints right off. Store it separately due to its special design for a Longer lifespan.
