Description
1.Upgrade 3d printing surface: A newest Janusbps printing platform for MK52 - MK3 - MK3S - MK3S+ -MK4 3D printer, Textured PEI Powder (Gold) + PET-CF Coating sheet(Black), both sides can be used. Compatible with various kinds of 3d printing material, such as PLA, PETG, ABS, TPU, TPE, HIPS, PA-CF, WOOD etc. Recommend ABS on the Powder-coated bed. The pattern that gets transferred is very cool..2. Double sided Build Plate: One side textured pei powder(Gold) + another coated PET-Carbonfiber sheet, gives you two Different experiences on one plate just by flipping it over. The matte texture makes it easier for the printing material to adhere to the surface, especailly for ABS. So does the new side. It leaves a smooth finish inside with the beautiful-texture finish. The PET-CF surface has grids to help observe nozzle positioning easily..3. Solution for first layer adhesion: **Do Not sand on this CarbonPET bed to avoid permanent damage.** No glue, No tap, Adjusting an Appropriate Z value is very important, here my setting value is -0.945 for reference, if too low causing a filament buildup and easily scratch the print bed. Too high the prints come off the build plate, can't stick onto the hotbed. Key factors for a good layer: Turn off the fan and Slow down the speed to 100 when printing. A roll of dry filament also helps..4. Applicable Model: Size: 253.8x241mm/10x9.48 inch, compatible with Prus i3 MK52 MK2.5 MK3 MK3s that has the magletic hotbed itself. Please re-measure your hoted bed before ordering, not rely the machine's build volume which is smaller than that of the bed..5. Good Quality: Made of high quality stainless steel, Flexible, removable, high strength and heat resistance, Three-Layer design, thicker and more durable. Textured PEI Powder side can easily handle temperatures up to 190°C and Carbonfiber side can work with temperature up to 100℃. It's easy to remove the printed matter from the platform by bending slightly. Through hundreds of experimental tests, repeated use is still as new.
