Jeanoko 1pcs Ad9834 DDS Generator Module Sine/Triangle/Square Generator for Frequency Stimulus/Waveform Generation Etc Electronic Components
$23.29

Description

Function Introduction:The generator used for frequency excitation/waveform generation, frequency phase tuning and modulation, low-power RF/communication systems, liquid and air flow measurement, sensor applications, proximity, motion and defect detection, testing and medical equipment.Parameter Information:AD9834 is a 75 MHz, low power DDS device capable of producing high performance sine and triangular outputs. Also integrates its on-chip comparator, support the generation of square for clock generation. When the supply voltage is 3V, the power consumption of only 20mW, very suitable for power sensitive applications.Three-wire Serial Interface: AD9834 via a three-wire serial interface to write data. The serial interface that operates at clock rates up to 40MHz and is compatible with digital signal processing and micro-controller standards. The device is 2.3V to 5.5V power supply. Analog and digital sections are independent, you can use different power supply; for example, AVDD can be 5V, and DVDD can be 3V.Phase Modulation And Frequency Modulation Function:AD9834 provides a phase modulation and frequency modulation function. Frequency register 28bit; clock rate of 75MHz, can achieve a resolution of 0.28 Hz. Similarly, when the clock rate is 1 MHz, AD9834 can achieve a resolution of 0.004Hz. Affect the frequency and phase modulation method is through the serial interface to load the register, then register by software or FSELECT / PSELECT pin switches Device.Control Pin Sleep:AD9834 has a control pin Sleep (SLEEP), to support power-down mode control from the outside. No part of the device may shut off to minimize power consumption. For example, when generating a clock output can be turned off DAC. The device uses a 20-pin TSSOP package

logo

Amazon