Description
Choose safety first with our CSA and ETL certified constant wattage pipe heating cable. These certifications guarantee top-notch safety standards. Protect your pipes and equipment from overheating and short circuits while reducing fire risks. Count on us for high-quality, certified solutions. Buy now for peace of mind..๐๐จ๐ ๐๐ค๐ง ๐ฌ๐๐ฉ๐๐ง ๐๐๐ก๐ก๐๐ ๐ฅ๐ก๐๐จ๐ฉ๐๐ (๐๐ฃ๐๐ก๐ช๐๐๐ฃ๐ ๐๐๐) ๐ค๐ง ๐ข๐๐ฉ๐๐ก ๐ฅ๐๐ฅ๐๐จ. ๐๐ค๐ฉ ๐ช๐จ๐ ๐๐ค๐ง ๐๐ฃ๐ฎ๐ฉ๐๐๐ฃ๐ ๐๐ก๐จ๐, ๐ก๐๐ ๐ ๐๐ข๐ฅ๐ฉ๐ฎ ๐ฌ๐๐ฉ๐๐ง ๐ฅ๐๐ฅ๐๐จ, ๐๐ช๐๐ก ๐ก๐๐ฃ๐๐จ, ๐๐ค๐จ๐๐จ, ๐๐ช๐ฉ๐ฉ๐๐ง๐จ, ๐จ๐ฉ๐๐๐ข ๐ก๐๐ฃ๐๐จ ๐๐ฃ๐ ๐จ๐ค ๐ค๐ฃ. Two-year limited quality . If you are not completely satisfied with HEATIT heating cable, please don't hesitate to contact our customer service at any time, we'll try our best to solve your issues..Pre-assembled easy to install. Including grounded plug with light, built in thermostat, and instructions. Easy to install and use. 120 volt, 7 watts/ft. Built in thermostat to turn the cable 37F on 50F off. Energy saving. 100% screen rate with the Aluminum foil and tinned copper braid. Industrial grade heat shrinkage tube for connection. Tough XLPE as inner insulation and weather resistant PVC (high-low temperature) as out jacket..Maximum 1/2 in fiberglass insulation was used over the heating cable for lower temperature protection. Pipes must be at least 3 feet and at least 3/8'' and less than 1 1/2'' in. diameter. No crossing. No spiral. No overlap itself. Only straight..Testing the cable before the installation. Uncoil the cable, plug in the heat tape for water pipes and then put the thermostat part of the cable into an ice bucket for few minutes. When the temperature is below 37F, the thermostat will energize the cable to work. Normally you can feel the slight warm on the heating cable in few minutes. To avoid the overheat, please don't plug in the cable for a long time for testing. When you feel the slight warm, please turn it off.
