Description
HIGH POWER - The BTS7960 based driver is a driver for controlling high-power DC motors capable of delivering up to 43A at supply voltages from 6 to 27V.SPECIFICATION - Maximum current: 43A; supply voltage: 6V-27V; Input level: 3.3V-5V, over-voltage protection value: 30V, over-current protection value: 84A, over-heat protection value: 200℃, rated power: within 200W.CONTROL METHOD - PWM or level, Just need four lines from MCU to driver module (GND. 5V. PWM1. PWM2); isolation chip 5 V power supply (can share with MCU 5V), able to reverse the motor forward, two PWM input frequency up to 25kHZ; two heat flow passing through an error signal output.UNDERVOLTAGE SHUTDOWN - If the supply voltage drops below 5.4V, the motor driver will shut down and will not start until the supply voltage increases to 5.5V or higher.OVER TEMPERATURE PROTECTION - The driver adopts a high-power drive H-bridge drive module composed of BTS7960 chips, with thermal over temperature protection function, 5V isolate with MCU, and effectively protect MCU; 5V power indicator on board, voltage indication of motor driver output end; can solder heat sink
