Description
INFLATION ADAPTOR - DAN-FENDER Inflation Adaptor can be used on most DAN-FENDER products except for the Light Fenders and the soft, inflatable mini-buoys. If you don’t have access to an air-compressor with air-blowing-pistol, then the DAN-FENDER adaptor is a great alternative for easy inflation with either a hand, foot or car pump..WHAT’S INCLUDED - Each kit comes with one inflation adaptor, one spare valve, one valve plug and one 3mm screw to help remove the old valve..HOW TO USE - Use the adaptor as screwdriver to remove the valve-plug/protector, then screw in the adaptor until it tightens. Various models of inflation “nozzles” and pumps can be used to attach to the adaptor, but please note - do not over-inflate the fender/buoy and stay within the designed measurements. Once inflated, screw back in the valve-plug/protector again until it tightens..VALVE REPLACEMENT - DAN-FENDER small and medium buoys & fenders utilize high quality metal valve systems. If a valve should be leaking or by incorrect inflation pushed into the fender/buoy, then it can easily be replaced with a new valve! Replacement can be acquired with the inflation adaptor kit, along with the adaptor, valve plug and 3mm screw..HOW TO REPLACE - To remove, screw in a 3mm screw inside the center of the valve and pull it out with a tong or set of pliers. To install the new valve, push in (with a screwdriver) the new valve into the original position as the old. Reinflate the buoy or fender again.
