Description
Starter Kit Plus provides enough supports for approximately 750 sf (70m2) spaced 3 to 4 feet (1 meter) apart. Use on vapor retarders and barriers, elevated wood or metal secks, suspended slabs, concrete overlays, and sand..The FinCaps supports 1-1/2″ (40 mm) Pipe (1.5″ ID/1.9″ OD). A 1-1/4” or 2” pipe may also be used. Minimum height using a 1-1/2” ID pipe from the bottom of the Base Plate to the finished elevation of concrete is 4-3/4” (120 mm)..The FinStand supports the FinCap screed chair with a 1/2″ x 13 threaded rod. The stand can be adjusted 1-3/4″ (45 mm) to accommodate any variation in the deck. Use a nut and washer for fine tuning. See the chart below for rod size needed for the desired floor depth..The FinStand securely snaps into Base Plate and is textured to grip adhesives and will not puncture vapor barrier or membranes..The setup is fast and easy. Insert a 1/2″ (13 mm) rod between the bottom of the FinStand and Base Plate and space 3 to 4 feet (1m) apart. Insert the threaded rod, nut, washer and MAKO Screed Chair once the bases are in place..The stay-in-place forms are designed to stay in the slab and are corrosion resistant, even in extreme environments. They are non-metal and non-conductive which makes the chairs perfect for bridge decks, waterways, and power plants. DOT approved in most states. Made in USA
