Description
If you own a table saw, you probably have come across a situation or two where you need to make smaller cuts or make cross cuts. You may also have had the need to make repetitive cuts of the same length. Making small cuts, cross cuts and repetitive length cuts is where table saw crosscut sleds excel. Crosscut sleds help stabilize the work piece and are very accurate since they are essentially calibrated to your saw during the sled building process.Cross-cutting small pieces can be challenging and sometimes a bit dangerous. We can use a standard miter gauge, but that will typically let the cut off piece loose and it can fly off the table or into the saw blade opening. In steps our Crosscut Sled with Stop Block and Adjustable Rails. This little sled makes cutting off small pieces a breeze..While you can crosscut small pieces with this sled, you can also crosscut panels up to 13-1/2 inches wide. This makes it perfect for all kinds of projects where you need a straight line crosscut that a miter saw simply can not make. It’s the perfect mid length cross cut solution..The sled platform runs on two aluminum tracks that can be adjusted side to side to fit most any table saw. The aluminum tracks are designed to fit into standard ¾” x 3/8” miter slots. The tracks will not fit Ryobi table saw slots as well as a few other outlier table saws. We ask that you please measure your slots before ordering..The stop block is made from a composite material so if it accidentally comes into to contact with the saw blade, it will not damage the blade. The stop can be used on either side of the sled and is ideal for duplicating the same length of cut over and over again as needed. The sled measures approximately 18” long by 16” wide (measuring the base).
