Description
Build your next table saw sled, router table jig or band saw fixture to operate with a smooth sliding action using our 19 inch Precision Aluminum Miter Bar! Attach the aluminum bar to most any type of sled, jig or fixture that is to be used with a 3/4 inch (19mm) by 3/8 inch (9mm) miter slot. Using our aluminum bar versus plastic or wood gives your sled, jig or fixture more strength and stability and it won’t bend or warp..When building sleds, jigs and fixtures, one of the most important aspects is to achieve a smooth sliding action without side to side play. The 19 inch Precision Aluminum Miter Bar does both with its solid aluminum bar and 5 adjustable spring loaded plungers. The plungers can be adjusted with the included hex key wrench for just the right fit..Not only is the Aluminum Miter Bar adjustable, its easy to mount! You can mount the bar from the top of your sled, jig or fixture platform or base, or you can mount it from the bottom. There are threaded holes along the length of the bar for mounting the bar using 1/4 inch by 20 tpi machine screws (included). There are also counter sunk holes on the bar to mount the bar using #8 wood screws (included)..Once you mount the bars to your sled, jig or fixture you are sure to feel the difference. This is especially true when you first run the bars through your miter slots. The smooth sliding action is perfect for crosscut sleds, miter angle jigs, shop made coping sleds and a whole lot more! Using two bars (only one is included) for even more stability works exceptionally well..The bar is approximately 19 inches long and will fit into standard (3/4 x 3/8 inch) miter t slots and u-shaped miter slots. Non-standard slots found on some job site style table saws and other small machinery will NOT accept this bar due to the non-standard slot dimensions. We recommend that you measure your miter slot before placing your order.
