Description
Our Flood Paste in a Cartridge starts out as a thick paste that can be pushed deep into all types of openings and hard-to-reach areas. It dries to a strong, flexible, rubberized barrier. It seals out water, air, and moisture and remains completely flexible. Once floodwaters recede, our Flood Paste can be easily removed. Flood Paste in a Cartridge is the primary Flood Protection product and should be used as a base coat for your first layer of protection. The cartridge nozzle allows you to target specific areas that need to be sealed. Use on windows, doors, garage doors, and all types of seams, casings, thresholds, conduits, vents and ducts, keyholes, and more. When applying our Flood Protection Paste in a Cartridge, always to push the Flood Paste into all seams and openings using a gloved finger, Flex Gap filler tool or similar tool. This will help create a watertight seal. A common mistake is not pushing the paste into the opening being sealed. Always be cautious of any sharp objects that may cause injury. Flood Protection Paste in a Cartridge has a precision nozzle that allows you to target specific areas that need to be sealed. Use on all types of openings such as windows, doors, seams, garages, casings, thresholds, conduits, vents and ducts, key holes and more. Once waters recede, our Flood Protection Paste can be easily removed. Were proud to say that when used in combination, and as directed, our Flood Protection Products have been independently verified by UL Solutions to hold back 3ft of water for 14 days on gaps up to inch. Tested in laboratory settings. Patent Pending for Products and Uses. DRY TIME Depending on temperature, humidity and thickness of application, Flood Paste will dry to the touch in approximately 2 to 6 hours, and fully cure in approximately 24-48 hours. Allow product to fully cure before floodwaters arrive. To reuse cartridge, leave a small bead of paste at the tip of the nozzle to create a plug. When reusing, remove plug from the
