Description
12V Oil Transfer Pump---- This oil extractor transfer pump uses 12v mini self-priming pump to exchange car engine oil. The oil transfer pump works by connecting the clamps to the 12V car-battery. Simple on/off power switch, easy to use. Maximum Pressure: Maximum 0.8MPA. Maximum Flow: 5L/min.Quick and Clean Oil Change---- This electric oil extractor pump kit is an ideal equipment for quick and clean oil-change. The pump can not only pump oil, but also pump hydraulic oil and other liquids. However, this transfer pump is not allowed to pump corrosive liquid, strong acid and strong alkaline liquid.Wide Application---- This electric oil extractor pump kit is widely used in general industrial equipment, chemical equipment, shipbuilding, drinks, carpet and floor cleaning, water purification and water treatment equipment, vehicle cleaning, agricultural spraying, zo pipeline pressure, air cleaning cooling, coal and metallurgical industries.Size---- Pump Diameter is about 4.8cm / 1.89". Length is about 14.5cm / 5.7". Outlet Pipe Size(Dia.x L) is about 11mm x 140cm / 0.43" x 55". Inlet Pipe Diameter is about 8mm & 6 mm / 0.31" & 0.24". Inlet Pipe Length is about 100cm / 39.37". Cable Length is about 30cm / 11.8". Clips Length is about 8cm / 3.15".Note---- Please use when the engine is warm, the engine oil is warm and viscosity is lower, this will be easier and faster to pump. If you want to connect this pump to AC power, you will need a power converter. If you have not used it for a long time, it may have no suction, then just pour the water in the pump, and run the pump for a few minutes until the air is all out
