Description
ใ๐ฎ๐ณ๐ต๐ด๐ฏ๐ด ๐ฟ๐๐๐๐ ๐๐๐ผ๐๐๐๐ ๐๐๐๐๐๐๐ ๐๐๐ใ-- w10724237 279838 Dryer Heating Element Assembly Kit includes 1 x 279838 Dryer Heating Element, 1 x 3977767 High Limit Thermostat, 1 x 3387134 Cycle Thermostat, 1 x 3392519 Thermal Fuse, 1 x 3977393 Thermal Cut-off Switch. The coil on the 279838 heating element accepts and resists the controlled current, thus heating the wire. The heat generated is used to dry the clothes in the dryer. 279838 dryer heating element content of NICKEL and CHROMIUM reaches 90% and the length of the heating wire is 25% longer than other replacement parts of the ordinary dryer. It is rated at 5,400 watts and 240 volts and has a 2-5/16 "male terminal..ใ๐๐๐๐ ๐๐๐ผ๐๐๐๐ ๐๐๐พ๐๐๐ ๐พ๐๐๐๐๐๐๐ ๐ผ๐๐๐๐ใ-- 279838 4531017 Dryer element includes the housing with the heating element coil and insulators attached. The heating coil is made of an alloy of nickel and chromium. It has a high resistance that prevents itself from breaking and burning out. The insulators are made of high-tem-perature ceramic. They are firmlymounted into the frame to hold theheating coil, which will not come looseunder the vibration of a running machine. The dryer heating element kit can SOLVE THE FOLLOWING PROBLEMS โ Dryer takes too long to dry, โก Not enough heat, โข Dryer does not automatically shut off when it overheats, โฃDryer does not heat up..ใ๐ฑ-๐๐๐๐พ๐ ๐๐๐ใ-- The 3977767 is Dryer high limit thermostat, pushes onto the terminal of the heating element. Has one 1/4" male terminal, 1/4" female terminal, and one 3/16"male terminal. โคThe 3387134 Cycling Thermostat has an internal offset heater that opens at 155โ and closes at 130โ. โคThe 3392519 Thermal Fuse is non-recoverable thermal fuse with two 3/16" wire terminals. lf the dryer overheats, the thermal fuse blows to cut off power to the dryer and/orstop the dryer from running. โคThe 3977393 Thermal Fuse keeps the dryer from overheating. Once the dryer temperature reaches 221 degrees Fahrenheit, this piece will shut down power to theheating element..ใ๐ฎ ๐๐๐ผ๐๐ ๐๐ผ๐๐๐ผ๐๐๐ใ-- 279838 Dryer Heating Element Kit supports 2 YEARS RETURN and EXCHANGE. Our company attaches great importance to the shopping experience of every customer. No risk shopping, warranty period, if there is any quality problem, please contact customer service. Heating elements are used to heat the air inside the dryer. A thermostat regulates the temperature within a safe range. Thermal fuse cuts off the power supply in case of high temperature. Check the list of compatible models in the description to find yours !.ใ๐๐๐๐๐ผ๐พ๐๐๐๐๐ ๐๐๐ฟ๐๐ใ-- The 279838 Dryer Heating Element Kit can fit for Whirlpool, Kenmore, Maytag, Crosley, Kitchen-Aid, Roper, Estate, Amana and other brands dryer. โค279838 Replace: 2438, 279837, 279838A, 279838VP, 3398064, 3403585, 8565582, AP3094254, W10724237, W1072423, PS3343130, AH334313, EA334313. โค3977767 Replace: 3399693, L250-80F, AP3131941, PS351925, 898078, EAP351925. โค3392519 Replace: 3388651, 694511, 80005, G4AP0500, PS11741460, AP6008325, EAP11741460. โค3387134 Replace: 2011, 2893, AP6008270, PS11741405, 306910, 3387135, 3387139, ET187, EAP11741405. โค3977393 Replace: 279816VP, 3399848, 2651, 279816, AP3094244..ใ๐๐ผ๐๐ ๐๐ ๐๐๐๐๐ผ๐๐ใ-- The installation of 279838 kit is simple. Before replacing, turn off the power and water supply and wear work gloves. Remove the back cover of the dryer and locate where the heating element is located. Remove the fixing screws with a screwdriver, gently remove the heating element and disconnect the connected wires from the small temperature control unit and replace it. You can save a lot of money on replacing the dryer or hiring a mechanic. NOTE: When installing, please ensure that the kit is firmly connected to prevent the dryer from not running due to loose installation.