Description
[CAN'T Distinguish Moissanite]: This diamond testing pen can only help you distinguish between diamonds and imitation gemstones, but it cannot distinguish between natural diamonds and laboratory-grown diamonds (Also Called Moissanite)..[CAN'T Test Metal]：Please never use this diamond testing pen test metal!.[Steps of Usage]: Remove the cap from the testing pen>>Insert the battery we attached >> Turn on the diamond tester pen and wait until both the lambs OK >>Place the pointer vertically on the surface of the stone >>Observe the indicator lights and listen to the sound>> get the result.[FOR DIAMOND]:For testing diamond(include real diamond and Moissanite), it will emits beeping-beeping-beeping in a low frequency, 1 time/second. Meanwhile lights ≥ 9 (Notice: the bigger the stone is, the more lights on).[INITIALIZATION SETUP] After powering on, turn the wheel to keep 4 green lights on to finish the Initialization. Otherwise you will get inaccurate results. All test must be done by two hands, one for hold the diamond and one for the diamond tester. As for the hand which hold diamond tester, you have to TOUCH the electricity conductive panel on the back of the unit..[TWO HANDS OPERATION] All test must be done by TWO hands, one for hold the diamond and one for the diamond tester. As for the hand which hold diamond tester, you have to touch the electricity conductive panel on the back of the unit.If you test the diamond just by one hand, you will get a wrong result..[WARM NOTICE 1]: Please make sure the ambient temperature is not lower than 10 degrees Celsius when in use, and shut down promptly when not in use..[WARM NOTICE 2]: Please Don't test Metal!.[WARM NOTICE 3]:The contacts need to be pressed vertically against the surface of the diamond..[WARM NOTICE 3]: We will be always on hand when you have problems.Also you can check the manul.
