Description
WARM REMINDER: The bottle is more than 1/2 empty because the thread locker hardens in the absence of air, so filling the bottle completely would cause the glue to start hardening. The bottle is air-permeable and allows air to pass through the wall. There is also some air gap over the product inside the bottle to maintain the stability of the threadlocker. Thus a 50 ml pack contains a 50 ml threadlocker in a much larger bottle..APPLYING: Apply to fill gaps up to 0.25mm with 10 mins fixture time. Strength: medium, high viscosity. Solidification time(first solidification/full solidification): 20m/24h. Service maximum temperature: 180℃. Shear strength: 3500 Lbs/inch² 24 N/mm². Viscosity for speed at 20 RPM is around 2155 mPa·s..USE-METHOD: 1. Clean all surfaces. 2. Shake well before use. 3. Apply sufficient product onto the bolts at the nut engagement area. If parts have come into contact with water-based solvents or cutting fluids and a protective layer is left on the surface, flush with hot water before gluing..WHAT CAN DO: Preventing parts from loosening due to vibration that can lock and seal the metal nuts and bolts. Easy to use and clean. Can eliminate the micro-vibration wear phenomenon, and withstand high load and anti-rust. Applied on the threads of the nut and bolt and then it is bonded together. The thread locking adhesive evenly between the nut and bolt and then hardens in the absence of air, locking the nut and bolt together..APPLICATION: The sealants are widely used in automotive for valve covers, oil pans, pumps, engines, and others to extend the lifespan; at home for bicycles, motorcycles, locksets, lawn mower, hardware, and so on to ensure the bolts stay in place; in shop for homemade project fix, sealing bezel, freestyle drone, desktop printer and more to improve the performance of product.
