Description
Size - Thickness: 0.13mm / 0.01-inch, Width: 10mm / 0.4-inch, Length: 10m / 33 ft Material - Adopt quality fiberglass as woven-material, coated with PTFE resin, The PTFE tape has smooth surface, anti-adhesion, corrosion resistance, high temperature resistance, and insulation properties. Feature - The tape has a high temperature resistance of 500F(260C), and the PTFE coating provides a smooth, non-stick surface, is waterproof, and is suitable for insulation and friction reduction applications. Application - Widely used in impulse sealer, high-speed sealing machine, motor, low voltage electrical products, wire and cable insulation protection. Note - The adhesive tape chosen should be wider and longer than necessary for broad compatibility. The adhesive strip should be replaced when it becomes discolored or the seal is not good. 1. Adopt quality fiberglass as woven-material, coated with PTFE resin, The PTFE tape has smooth surface, anti-adhesion, corrosion resistance, high temperature resistance, and insulation properties. 2. The tape has a high temperature resistance of 500F(270C), and the PTFE coating provides a smooth, non-stick surface, is waterproof, and is suitable for insulation and friction reduction applications. 3. Widely used in impulse sealer, high-speed sealing machine, motor, low voltage electrical products, wire and cable insulation protection. 4. Simply peel off the tape from the roll and place it on the correct area. Above the wire of the vacuum sealer, below the wire of the pulse sealer. 5. The adhesive tape chosen should be wider and longer than necessary for broad compatibility. The adhesive strip should be replaced when it becomes discolored or the seal is not good.
