Description
【Professional Car Diagnostic Tool】Our OBD2 breakout box is an automotive diagnostic tool for the OBDII diagnostic link connector. After connecting to the car's OBDII system, the OBDII connector can be easily and safely accessed to monitor protocol, power and ground signals. Once an unconfirmed signal is detected, the OBDII protocol detector can also be connected to a multi-meter or oscilloscope for further testing..【Quickly Diagnose Communication Signal&Power Supply&Grounding Detection】By identifying the different colored LED indicators of the OBDII breakout box, you can quickly determine if the vehicle's OBDII interface is communicating, powering, and grounding properly. Yellow LED indicators on indicates that the OBD2 scanner is communicating with the vehicle and there is a signal waveform on the corresponding pins 2/6/7/10/14/15. When the vehicle is properly grounded, the green LED indicators on pins 4 and 5 are on. The red LED indicators on pin 16 is on when power is normal..【16 Pins Design&4mm Banana Plug of OBD2 Breakout Box 】The input jack layout of OBD2 protocol detector fully simulates the 16-pin layout of the OBDII interface, allowing more tests to be performed quickly and intuitively. When the OBD2 scanner communicates with vehicles, all 16 pins of OBDII breakout box can be easily connected. No need to directly operate the pins of the OBDII interface. The built-in input jack of the OBDII protocol detector can be connected to any type of 4mm banana plug. You can connect a multimeter or an oscilloscope to the banana jack to detect the detailed signal information of the corresponding lighted port..【Male/Female Header Connectors】 The OBD2 breakout box is equipped with male and female header connectors, you can place the junction box between the diagnostic tool and the vehicle. The cable length of the OBDII protocol detector is 90 cm/35 inches, which is more quickly, easily and safelyc to measure CAN bus signals..【CAUTIONS】The OBD2 breakout box is designed for use by automotive professionals. Do not connect pin jumpers without understanding the circuitry. Do not use this OBD2 breakout box to power load devices that exceed 1 amp. Improper use of this OBD2 breakout box may result in damage to the vehicle data communication system and related circuits and systems.
