Description
Each dripper stake is adjustable by turning the top dial to water from 0 to 10 GPH and releasing drops of water up to spraying 8 individual streams of water in a 3-ft diameter. Use these adjustable dripper stakes to gently water patio and potted plants or your landscapes. A 25 PSI pressure regulator MLA-25PR and a filter MLFF-41 are highly recommended to be used first at the water source when using these drippers. Install by running a piece of 1/4-in vinyl tubing to the plant from the 1/2-in poly tubing using the enclosed 1/4-in barbed coupler that twist-off from the side of stake. Use either of our punch tools MLA-51 or MLA-TOOL to snap a hole into the 1/2-in poly tubing to install the 1/4-in barbed coupler that twist-off the side of stake. Push the end of the 1/4-in vinyl onto the side 1/4-in barbed inlet of the stake and place near the base of the plant. If you punch a hole in the wrong place or want to relocate the dripper then simply remove it from the 1/2-in poly and snap in one of our goof plugs. Also use our 1/4-in tees and elbows MLT-ATE to run the 1/4-in vinyl in opposing directions or in tight corners to supply water to these drippers. With a beginning water pressure of 25 PSI you can install up to 30 of these dripper stakes off our 1/2-in poly tubing. Mister Landscaper 11 GPH Adjustable Drip Irrigation Multi-stream Dripper Stake (Pack Of-3) in Black | MLD-STA
