Description
Inner Dia.=10mm, Outer Dia.=22mm, Thickness=6mm Bearings are shielded on BOTH SIDES to keep lubricant in Chromium Steel long-life bearings, smooth and low noise ABEC Tolerance 1 (P0), Z1 Noise Level for most general use Static load rating of 1.3kN and dynamic load rating of 2.7kN NOTE： Please refer to the picture and select right type of bearings before your order (Sealed or Shield on BOTH or SINGLE side of the bearing). Suffix on the bearing just for differentiating between Sealed and Shield type of bearing. It would not affect the use of our product. Description: Single-row, pre-lubricated, normal accuracy. Deep Groove Ball Bearings are one of the most widely used rolling bearings. They are used to accommodate radial and axial loads in both directions. With small friction and high-limit speed, Ball Bearings are cost-effective and require little maintenance. Chromium Steel (GCr15) made with heat treating, provides high and uniform hardness, good wear resistance,. Suitable for all kinds of industrial equipment, micro motor, small rotary motor, office equipment and so on. Selecting Guide: Shields (Designation Suffix Z/ZZ) - High speed. Protect from dirt and debris. Sealed (Designation Suffix RS/2RS) - Made of sheet steel reinforced NBR (oil- and liquid-resistant). Lower limit speed than Shield Bearings. Specification: Shield Type: Double Shielded Inner Race/Outer Race Material: Chrome Steel (GCr15) Cage Material: Stamping Steel Inner Diameter (d): 10mm Outer Diameter (D): 22mm Thickness (B): 6mm Dynamic Load Rating (Cr): 2.7kN Static Load Rating (Cor): 1.3kN Accuracy Class: P0 (ABEC1) Noise Level: Z1 Number of Pack: 1 Pcs
