Description
✅Replacing or buying new Modern Floor Registers / Vents: – This Cast Aluminum 4″ X 12″ size fits most Standard air ducts opening sizes for floors, walls, and ceilings – Indoor use. It has been designed for floor installations. The Vent cover overall top Faceplate size is 6″ x 14” & is 5 mm thick , are handcrafted and finished.✅Designs/Pattern: – Our Modern Linear design comes with a choice of colours and finishes that will add beauty and a rich look to any room of your modern, contemporary home. These floor registers offer a beautiful contrast with your flooring whether carpet, tile, or wood! For 109 Model, edges have been squared off, so it can be installed as a drop-in register or a flush mount register. If used as a flush mount floor register, you need to trim your flooring, so that the thickness in your flooring material is the same thickness size as the register faceplate..✅Floor Register: We have made from durable sand cast aluminum to hold regular, light foot traffic. Durable, can step on it, will not bend or break the faceplate sits 7 mm above the floor level. Comes with pre-attached detachable Steel dampers at the back to adjust airflow, Dampers can be removed if required. The metal damper controls the airflow direction (to open and close airflow) as per your need.✅Finishes: The Floor register comes in a variety of finishes to match any décor. It is made of cast aluminum rust-free material, The baked-on powder coat fine-grain matte finish provides extra protection that lasts long, can be re-painted using metal spray paint of any colour to match your décor..✅Easy to Install: It is very easy to install and maintain for any homeowner. Just drop it / insert it into the duct opening of the floor. No tools required, Floor registers can be installed on walls and ceiling, we provide pre-drilled countersunk holes and matching screws, just select holes or no holes as an option while placing an order. Floor register face plate sits above the Floor surface, it does not flush with the Floor..✅Listed product sizes refer to the duct opening measurements, outer dimensions of the cover faceplate, in most cases are 1″ or more longer on each side/direction.
