Description
RUST ENCAPSULATOR: Iron oxide is no match for our original Eastwood Rust Encapsulator in a flat black finish. This aerosol paint-over-rust solution quickly stops surface rust before it can compromise the part’s structural integrity. Rust Encapsulator penetrates deep into the metal to prevent existing rust from spreading or future rust from forming. It’s also heat-resistant up to 400 degrees, which means it can be safely used in the engine bay or near the brakes..HOW TO USE: Use a wire brush to remove loose rust, scale and paint. Remove dust, grease, oil deposits. Shake can for at least 2 mins after mixing ball starts to rattle. Feather surrounding paint with 220grit sandpaper. Apply the rust encapsulator can 10-12" from surface. Single coats dry to the touch in 20 min and are thoroughly dry in 3-4 hours at 68 degrees F. For greater durability a second coat can be applied one hour after the first. Allow 6-8 hours after last coat before applying top coat..EASTWOOD QUALITY: Eastwood offers solutions which combines our 4,000+ unique products with the know-how to “Do The Job Right”. With an In-house product design, development and testing and a strong track record of high-quality, innovative products. Used and trusted by top builders to beginners and also provides a Lifetime Tech Support..SAFETY INFORMATION: Always wear eye, skin and respiratory protection when applying this product.Use in a well ventilated area away from open flame. Store spray in a cool dry place. Warning: This product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm..WARRANTY: Comes with a 90-day limited warranty and 90-day return.
