Description
▲Humanized Design - The wall detector is equipped with a backlight, the data is still clearly visible even in low light conditions. Press and hold the "Wood" and "Moisture" buttons simultaneously to toggle between inch/cm units of measure. Long press the "Wood" and "Metal/Power Cord" buttons to turn the sound on or off. A cotton cover on the back of the device prevents damage to the wall..▲2 in 1 6 modes - This detector is not only a wall detector but also a hygrometer. Because this wall detector can switch between 6 modes according to your needs: dowel-precise, dowel-deep, ferrous metal, non-ferrous metal, FireWire and moisture. The 2-in-1 wall and humidity detector has six scanning modes, so you can satisfy both professionals and DIY enthusiasts..▲Automatic calibration and shutdown - The wall detector has an automatic calibration function. Hold the device against the wall for 1-3 seconds. If the indicator light is green, the automatic calibration is successful. If there is no operation for five minutes, the device will turn off automatically to save energy..▲LCD display, indicator light, audible alarm, clear mode, magnetic, battery, metal depth, edge, center, distance, signal strength scale and signal strength percentage on the LCD screen - When the detector is calibrated and close to the detected object and reaches the center, the indicator light changes from green to amber, then to red. At the same time, an audio signal sounds to remind you that the center has been found..▲ Professional Technology & Service - PIGADA is a team dedicated to the development and production of stud detectors with professional technology and mature production processes that provide you with the highest quality and highest precision stud finder. Please feel free to contact us if you have any problems with use. We seek to provide a good customer experience.
