Description
This is a physical print out that will be mailed to you. Pocket 3.5 longest side Pocket 4 longest side Infant 6\" longest side Toddler 7\" longest side Toddler 8\" longest side Youth 9\" longest side Youth 10\" longest side Adult 11\" longest side Adult 12\" longest side Adult 13\" longest side DTF Transfers can go on any T-shirt. It has a thinner feel than vinyl. **Must use a Heat Press**** Pressing Instructions DTF - Heat press temperature should be set to Polyester and Polyester Blends 285-Cotton 300 F. Prior to heat pressing, hover the heat press over the transfer INK SIDE UP as close as you can without touching the transfer and allow the transfer to warm up for 30-60 seconds and this process will remove moisture from the transfer. This moisture in the ink builds up during the mailing process. After the transfer is warmed up, it is ready for step 2. Use Medium to heavy Pressure to press the moisture out of your shirt and then press the transfer on the shirt for 15 seconds, let cool completely and peel. If there are small elements in the design, let it cool completely before removing the transfer film. Use a cover sheet (Teflon or white butcher paper/copier paper) after you ve peeled the transfer, press again for 5-10 seconds. -If printing small print or small text, press for 20 seconds using heavy pressure and let the transfer cool before peeling. If for any reason that the print begins to lift off the shirt, usually due to an inexpensive heat press Don t freak out, STOP
