Description
Ozark Trail Ultra Light Back Packing 4' x 7' x 42" Tent with Full Fly, Sleeps 1: Freestanding and lightweight tent Typical set-up time around 2 minutes Design provides exceptional headroom Mesh wall provides excellent ventilation and 360 view 7'L x 4'W x 42" center height Anodized featherweight aluminum hubbed pole set Includes tent fabric with mesh walls, anodized aluminum hubbed pole set for support, rainfly fabric, stakes, guy lines, storage bag Directions for Set Up: 1. Choose a site — Level is best — Either watch video on this page or follow directions below 2. Unpack tent, separate and organize components 3. Spread the tent out with its floor on the ground 4. Extend the aluminum hubbed pole set. Thread the longer pole through the ridge sleeve of the tent 5. Clip the plastic hooks on tent to the aluminum side poles 6. Insert poles into grommets on webbing strap stake loops 7. Stake out the tent corners through webbing straps 8. Drape rainfly over the tent, aligning seams to frame 9. Pull out front vestibule until taut and stake down 10. Clip the buckles on the rainfly and stake webbing loops together 11. Guy out tent if necessary using guylines and stakes Directions for Take Down: 1. Carefully remove stakes by pulling out the hook ends. Do not pull on the webbing loops sewn to the tent fabric. Put stakes into stake bag 2. Detach the buckles between the rainfly and the webbing tent stake loops. Remove the rainfly and fold into rectangular shape the same width of the pole bag 3. Remove pole ends from grommets 4. Remove plastic clips and slide pole out from the ridge sleeve. Break hubbed pole set down and put into the pole bag 5. Fold tent into rectangular shape the width of the pole bag's length 6. Lay rainfly, pole bag, and stake bag at one end of the tent fabric and roll it all tightly together, slowly squeezing air out as you go 7. Store tent in carry bag provided Directions for Cleaning: wipe clean with a water dampened cloth and air dry Orange
