Wooden Camera RED DSMC2 Accessory Kit - Pro, 19mm
$2,133.00
Shop on Adorama

Description

The RED DSMC2 Accessory Kit (Pro, 19mm) is compatible with RED DSMC2 Brains (Monstro, Helium, Gemini), Weapon, Epic Weapon (Epic-W), Scarlet Weapon (Scarlet-W), and Raven.The RED DSMC2 Accessory Kit (Pro, 19mm)includes the Easy Riser, a baseplate that has 1/4-20 and 3/8-16 mounting points on the bottom, provides 1/4-20 holes on the side for attaching accessories and also brings the camera up to correct lens height when using the included Unified Bridgeplate (19mm). The Unified Bridgeplate (19mm) holds 2x 19mm Rods (12") and attaches to the ARRI standard Safety Dovetail (12").On top of the camera, the Pass Through Top Plate (RED DSMC2) provides 26pin LCD Connection and 3pin trigger handle interface. The Trigger Handle (RED DSMC2) is a tool-less handle that can trigger the camera through the 3pin pogo interface on top of the camera or Pass Through Top Plate (RED DSMC2).The Ultra Arm Monitor Mount (1/4-20 to 1/4-20, 3") is an articulating arm with two sets of 25mm (1 inch) double ball joints which allow a monitor or accessory to be positioned in almost any orientation. Tool-less 1/4-20 screws on each end with non-slip rubber pads make accessory installation quick and easy. The A-Box (RED DSMC2) plugs into the RED Base Expander Module and converts the 3.5mm microphone input into two industry standard XLRs. Note that the Base Expander Module is required for the A-Box to function and phantom power is not available. - Pass Through Top Plate - Pass Through Top Plate provides 26pin LCD connection and 3pin trigger handle interface. Arrays of 1/4-20 holes in Red spacing, 3/8-16 holes for large accessories, and the ARRI standard accessory mount in several places. Attaches to top of camera by (4) 1/4-20 captured screws.Compatible with RED DSMC2 Brains (Monstro, Helium, Gemini), Weapon, Epic Weapon (Epic-W), Scarlet Weapon (Scarlet-W), Raven, and other DSMC2 cameras.This product is great for adding mounting points to your DSMC2 camera and allows for other cage and cable components like our Safety NATO Arm (RED DSMC2) and RED Male Pogo to Female Pogo LCD/EVF Cables to be attached as well. - Easy Riser - Riser shim plate compatible with RED DSMC2 Brains (Monstro, Helium, Gemini), Weapon, Epic Weapon (Epic-W), Scarlet Weapon (Scarlet-W), Raven, and other DSMC2 cameras. Combine with Unified Bridgeplate (19mm) or Unified Bridgeplate (15mm Studio) or other RED style bridge plates for correct lens height studio rods. Combine with LW 15mm Bracket (RED DSMC2)) for lightweight rods at correct lens height. - Trigger Handle - Trigger Handle is compatible with RED DSMC2 Brains (Monstro, Helium, Gemini), Weapon, Epic Weapon (Epic-W), Scarlet Weapon (Scarlet-W), Raven, and other DSMC2 cameras. It attaches without tools directly to the top of the camera brain or to the Easy Top (RED DSMC2) to trigger the camera through the pogo interface. Arrays of 1/4-20 holes in Red spacing, 3/8-16 holes for large accessories, and the ARRI standard accessory mount in several places. Attaches to top of camera by (2) 1/4-20 captured thumbscrews. Additionally, Rod Clamps can be attached to the front for a pass through top rod system. - Ultra Arm Monitor Mount - Ultra Arm Monitor Mount (1/4-20 to 1/4-20, 3") is an articulating arm with two sets of 25mm (1 inch) double ball joints which allow a monitor or accessory to be positioned in just about any orientation. Tool-less 1/4-20 knobs on each end with non-slip rubber pads make setup quick and easy. Black center thumbscrews ratchet to allow for easy positioning. The 3" title refers to the center extension length but actual length fully extended measures 240mm (9.4 inches).Ultra Arm components are interchangeable so you can use this arm in conjunction with the other options we make like 3/8-16, NATO Clamp, Hot Shoe, and Super Clamp. You can also change the center extension piece! Many existing 3rd party 25mm ball systems are compatible as well. Great for attaching LCDs, lights, audio recorders and much more! - Unified Bridgeplate - Unified Bridgeplate (19mm) is an ARRI standard bridge plate with 19mm studio rods (rods spaced 104mm center to center). New design allows the Bridgeplate to be converted from RED standard height to ARRI standard height making it compatible with any type of camera rig. Rubberized top coating prevents twisting and slotted design accommodates non-standard screw spacings.Combine with Unified Baseplates for correct rod height on cameras like Combine with Unified Baseplates for correct rod height on cameras like Sony FS7, FS5, F55/F5, Canon C100mkII/C300mkII, C100/C300/C500, Blackmagic URSA Mini, Panasonic VariCam LT/35, and risers for RED Weapon/Scarlet-W/Epic-W/Raven, and Epic/Scarlet. - Safety Dovetail - 12" ARRI standard dovetail with safety catch on one end to prevent accidental camera removal. Threaded 1/4-20 and 3/8-16 holes for accessory mounting and tripod attachment. Attach to Shoulder Pad for custom handheld configurations. Perfect for Manfrotto, Miller, Cartoni, and more. - A-Box - A-Box (Weapon/Epic-W/Scarlet-W/Raven) allows for two XLR microphones to be plugged into the RED DSMC2 Brains (Monstro, Helium, Gemini), Weapon, Epic Weapon (Epic-W), Scarlet Weapon (Scarlet-W), Raven, and other DSMC2 cameras while using the Base Expander Module. It is also compatible with any camera having a single 3.5mm input (also referred to as 1/8"). Highest quality professional grade connectors. Comes with Bolt On 19mm Rod for attaching to any 1/4-20 threaded hole and 15mm Adapter Bushing for clamping to 15mm rods. This adapter does not provide phantom power and the RED Base Expander Module is a required item (not included). - Rod - 19mm diameter iris rods used for mounting accessories like follow focus, matte box, lens support, servo motors, and more.

logo

Adorama

You may also like

Top in Adorama

View all
View all