Electrolux E36GC76EPS 36 in. Gas Slide-In Cooktop

36 in. Gas Slide-In Cook top Specifications. Product Weight - 166 Lbs. Voltage Rating - 120V / 60 Hz / 15 Amps. Connected Load - 0.25 Amps (0.03 kW). Always consult local and /or national electric and gas codes. Cook top ships with 3/4 in. factory regulator. L p conversion kit supplied. Cabinet and/or countertop must completely enclose recessed portion of cook top. Respect cutout dimensions and clearances and insure that all contact surfaces are solid and level. Plan installation to have electrical connection, gas shutoff valve, and pressure regulator accessible from front of cabinet. (Refer to electrical specifications in Product Installation Guide on web.). Allow 2-1/2in. minimum clearance between rear edge of cook top and nearest combustible surface above countertop. If required clearance can not be maintained, then optional stainless steel backsplash or noncombustible backsplash material must be used - otherwise installation will require custom cabinet and countertop dimensions. Overhead cabinetry should not exceed a 13 in. maximum depth. Allow 30in. minimum clearance between top of Cook top and bottom of unprotected wood or metal overhead cabinetry. Absolute minimum horizontal distance between overhead cabinets installed to either side of appliance must be no less than maximum width of appliance. Allow 10in. minimum clearance from edge of cook top to nearest combustible wall on either side of unit. Allow 24in. minimum clearance when bottom of wood or metal overhead cabinet is protected by not less than 1/8in. flame-retardant millboard covered with not less than No. 28 MGS sheet steel, 0.015 in. stainless steel, 0.024in. aluminum or 0.020in. copper. To reduce risk of fire when using overhead cabinetry, install range hood that projects horizontally a recommended minimum of 5in. beyond bottom of cabinets. Gas Slide-In Cook top model E36GC76EPS is NOT approved to be used over any Electrolux ICON Single Wall Oven.